Home › Code lookup › P0195
Powertrain code · Engine

P0195 Engine Oil Temperature Sensor Circuit

How urgent? Book a check when convenient

What it means

There's an electrical problem with the engine oil temperature sensor, which some engines use to protect the engine and manage things like valve timing.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring
  2. Compare the oil and coolant temperature readings on a cold engine

Signs you may notice

  • Check engine light on
  • Oil temperature gauge may read wrong
  • Usually little change in drivability

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed oil temperature sensor
  • CommonUnplugged, oily or corroded connector
  • PossibleOpen or shorted wiring

Typical repair once the cause is confirmed

Repair the wiring or replace the oil temperature sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace engine oil temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0195 mean?

There's an electrical problem with the engine oil temperature sensor, which some engines use to protect the engine and manage things like valve timing.

Can I drive with code P0195?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0195?

Common possibilities to test include: failed oil temperature sensor; unplugged, oily or corroded connector; open or shorted wiring. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.