Home › Code lookup › P0197
Powertrain code · Engine

P0197 Engine Oil Temperature Sensor Low

How urgent? Book a check when convenient

What it means

The engine oil temperature sensor is reporting an impossibly hot reading, usually from a shorted wire or failed sensor. Make sure the engine isn't really overheating.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Confirm the engine isn't really overheating and the oil level is correct
  2. Unplug the sensor and see if the reading drops to a very cold value

Signs you may notice

  • Check engine light on
  • Oil temperature gauge may read high
  • Cooling fans may run more

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed oil temperature sensor
  • CommonSignal wire shorted to ground
  • PossibleEngine actually running hot

Typical repair once the cause is confirmed

Repair the shorted wiring or replace the oil temperature sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace engine oil temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0197 mean?

The engine oil temperature sensor is reporting an impossibly hot reading, usually from a shorted wire or failed sensor. Make sure the engine isn't really overheating.

Can I drive with code P0197?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0197?

Common possibilities to test include: failed oil temperature sensor; signal wire shorted to ground; engine actually running hot. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.