Home › Code lookup › P0198
Powertrain code · Engine

P0198 Engine Oil Temperature Sensor High

How urgent? Book a check when convenient

What it means

The engine oil temperature sensor is reporting an impossibly cold reading, usually because it is unplugged, a wire is broken, or the sensor has failed.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check that the sensor is plugged in and the pins are clean
  2. Look for a reading stuck near minus 40, which points to an open circuit

Signs you may notice

  • Check engine light on
  • Oil temperature gauge may stay low
  • Usually little change in drivability

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged, oily or corroded connector
  • CommonFailed oil temperature sensor
  • PossibleBroken signal or ground wire

Typical repair once the cause is confirmed

Repair the connector or wiring, or replace the oil temperature sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace engine oil temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0198 mean?

The engine oil temperature sensor is reporting an impossibly cold reading, usually because it is unplugged, a wire is broken, or the sensor has failed.

Can I drive with code P0198?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0198?

Common possibilities to test include: unplugged, oily or corroded connector; failed oil temperature sensor; broken signal or ground wire. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.