Home › Code lookup › P0867
Powertrain code · Transmission

P0867 Transmission Fluid Pressure

How urgent? Get it checked in the next few days

What it means

The transmission computer found that hydraulic pressure is not what it should be for the current conditions.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check fluid level and condition
  2. Compare actual and commanded pressure on a scan tool
  3. Do a mechanical line pressure test

Signs you may notice

  • Check engine light on
  • Slipping, harsh or delayed shifts
  • Transmission may go into limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow or dirty transmission fluid
  • CommonFaulty pressure control solenoid
  • PossibleFaulty fluid pressure sensor
  • PossibleWorn pump or internal leak

Typical repair once the cause is confirmed

Correct the fluid level first, then repair the solenoid, sensor or internal leak that is causing the pressure problem.

Walk through it step by step: Transmission slipping →

Common questions

What does P0867 mean?

The transmission computer found that hydraulic pressure is not what it should be for the current conditions.

Can I drive with code P0867?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0867?

Common possibilities to test include: low or dirty transmission fluid; faulty pressure control solenoid; faulty fluid pressure sensor; worn pump or internal leak. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.