P0868 Transmission Fluid Pressure Low
What it means
The transmission computer sees hydraulic pressure lower than it should be. Low pressure lets clutches slip and can quickly damage the transmission.
Can I keep driving?
Limit driving. Low transmission fluid pressure can burn up clutches quickly, so check for leaks and low fluid. If it slips, is slow to go into gear, runs hot or goes into limp mode, stop driving and have it towed or checked right away instead of pushing on.
What to test before replacing parts
Check fluid level and look for leaks, then measure actual line pressure with a gauge and compare it to the sensor reading before replacing the sensor, pump or valve body.
- Check the fluid level and look for leaks
- Do a mechanical line pressure test to confirm low pressure
- Check the pressure control solenoid and its wiring
Signs you may notice
- Slipping or delayed shifts
- Check engine light on
- Transmission may go into limp mode
- Transmission may run hot
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLow transmission fluid from a leak or under-filling
- CommonClogged transmission filter
- CommonFaulty pressure control solenoid
- PossibleWorn pump or internal leak from seals or valve body
- PossibleFaulty pressure sensor reading falsely low
Typical repair once the cause is confirmed
Fix any leak and correct the fluid level, then service the filter; a solenoid or pump repair may be needed if pressure stays low.
Common questions
What does P0868 mean?
The transmission computer sees hydraulic pressure lower than it should be. Low pressure lets clutches slip and can quickly damage the transmission.
Can I drive with code P0868?
Limit driving. Low transmission fluid pressure can burn up clutches quickly, so check for leaks and low fluid. If it slips, is slow to go into gear, runs hot or goes into limp mode, stop driving and have it towed or checked right away instead of pushing on.
What causes P0868?
Common possibilities to test include: low transmission fluid from a leak or under-filling; clogged transmission filter; faulty pressure control solenoid; worn pump or internal leak from seals or valve body. A shop should confirm the cause before replacing parts.