Home › Code lookup › P0110
Powertrain code · Fuel and air

P0110 Intake Air Temperature Sensor 1 Circuit (Bank 1)

How urgent? Book a check when convenient

What it means

There's an electrical problem with the intake air temperature sensor, which tells the computer how cold or warm the incoming air is so it can adjust fuel.

Can I keep driving?

Usually you can keep driving and schedule a repair. The car may start harder in cold weather or use a bit more fuel. If it starts running rough, hesitating or stalling, or other codes show up, get it checked sooner.

What to test before replacing parts

Compare the intake air temperature reading to outside air on a cold engine, and check the connector and wiring for opens or shorts. The sensor may be built into the MAF.

  1. Check the sensor connector, which may be on the air box or MAF sensor
  2. Read the live intake air temperature; it should be close to outside air on a cold engine
  3. Check the wiring for damage

Signs you may notice

  • Check engine light on
  • Usually little change in how the car drives
  • Possible hard starting in cold weather
  • Slightly worse fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged or corroded sensor connector
  • CommonFailed intake air temperature sensor (often built into the MAF)
  • PossibleOpen or shorted wiring
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Repair the connector or wiring, or replace the intake air temperature sensor (or MAF sensor if it is built in).

Repair costInsufficient verified pricing for this vehicle and repair
Replace intake air temperature sensor. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P0110 mean?

There's an electrical problem with the intake air temperature sensor, which tells the computer how cold or warm the incoming air is so it can adjust fuel.

Can I drive with code P0110?

Usually you can keep driving and schedule a repair. The car may start harder in cold weather or use a bit more fuel. If it starts running rough, hesitating or stalling, or other codes show up, get it checked sooner.

What causes P0110?

Common possibilities to test include: unplugged or corroded sensor connector; failed intake air temperature sensor (often built into the maf); open or shorted wiring; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.