P0133 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
What it means
The front oxygen sensor on bank 1 is reacting too slowly to changes in the exhaust. This is usually a sign that the sensor is worn out.
Can I keep driving?
Usually you can keep driving for now, but get it checked within a week or two; a poor fuel mixture can harm the catalytic converter over time. If the check engine light flashes, the engine runs rough, or you smell fuel or rotten eggs, get it checked right away.
What to test before replacing parts
Check for exhaust and vacuum leaks and review fuel trims, then confirm the sensor's switching speed on a scan tool or scope before replacing it.
- Watch the live sensor reading; a healthy one switches rich and lean several times a second at steady 2,500 rpm
- Check for exhaust leaks ahead of the sensor
- Check for oil burning or coolant loss
Signs you may notice
- Check engine light on
- Lower fuel economy
- Usually no obvious change in driving
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonAged or worn upstream oxygen sensor
- CommonSensor contaminated by oil, coolant or fuel additives
- PossibleExhaust leak near the sensor
- PossibleVacuum leak or other fuel mixture problem
Typical repair once the cause is confirmed
Usually a new upstream oxygen sensor.
Known on these vehicles
Common questions
What does P0133 mean?
The front oxygen sensor on bank 1 is reacting too slowly to changes in the exhaust. This is usually a sign that the sensor is worn out.
Can I drive with code P0133?
Usually you can keep driving for now, but get it checked within a week or two; a poor fuel mixture can harm the catalytic converter over time. If the check engine light flashes, the engine runs rough, or you smell fuel or rotten eggs, get it checked right away.
What causes P0133?
Common possibilities to test include: aged or worn upstream oxygen sensor; sensor contaminated by oil, coolant or fuel additives; exhaust leak near the sensor; vacuum leak or other fuel mixture problem. A shop should confirm the cause before replacing parts.