Home › Code lookup › P0171
Powertrain code · Fuel and air

P0171 System Too Lean (Bank 1)

How urgent? Get it checked in the next few days

What it means

The engine on bank 1 is getting too much air or not enough fuel, and the computer has run out of room to correct it. A vacuum leak is the most common reason.

Can I keep driving?

If it runs smoothly you can usually drive gently for a short time, but get it checked soon; a lean engine can misfire and run hot. If the check engine light flashes, the engine shakes or misfires, hesitates badly, or stalls, slow down and get it checked right away.

What to test before replacing parts

Smoke test for vacuum leaks, check MAF readings and fuel pressure, and review short and long term fuel trims before replacing the MAF, an O2 sensor or the fuel pump.

  1. Listen for hissing and inspect vacuum and PCV hoses, or have a smoke test done
  2. Clean or test the mass air flow sensor
  3. Check fuel pressure if no air leak is found

Signs you may notice

  • Check engine light on
  • Rough or unsteady idle
  • Hesitation or stumble when accelerating
  • Possible misfires or hard starting

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum leak from a cracked hose, PCV hose or intake gasket
  • CommonDirty or faulty mass air flow sensor
  • PossibleWeak fuel pump or clogged fuel filter
  • PossibleClogged or dirty fuel injectors
  • PossibleExhaust leak ahead of the upstream oxygen sensor

Typical repair once the cause is confirmed

Most often a vacuum leak repair or a MAF sensor cleaning; low fuel pressure needs a pump or filter.

Repair costInsufficient verified pricing for this vehicle and repair
Repair vacuum leak (hose, PCV or intake gasket). Prepare an itemized shop request.

Where it shows up

  • Frequently traced to cracked PCV or intake hoses on older V8 trucks and SUVs

Known on these vehicles

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0171 mean?

The engine on bank 1 is getting too much air or not enough fuel, and the computer has run out of room to correct it. A vacuum leak is the most common reason.

Can I drive with code P0171?

If it runs smoothly you can usually drive gently for a short time, but get it checked soon; a lean engine can misfire and run hot. If the check engine light flashes, the engine shakes or misfires, hesitates badly, or stalls, slow down and get it checked right away.

What causes P0171?

Common possibilities to test include: vacuum leak from a cracked hose, pcv hose or intake gasket; dirty or faulty mass air flow sensor; weak fuel pump or clogged fuel filter; clogged or dirty fuel injectors. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.