Home › Code lookup › P0174
Powertrain code · Fuel and air

P0174 System Too Lean (Bank 2)

How urgent? Get it checked in the next few days

What it means

The engine on bank 2 is getting too much air or not enough fuel, and the computer can't add enough fuel to correct it. When it shows up with P0171, look for a problem that affects both sides.

Can I keep driving?

If it runs smoothly you can usually drive gently for a short time, but get it checked soon; a lean engine can misfire and run hot. If the check engine light flashes, the engine shakes or misfires, hesitates badly, or stalls, slow down and get it checked right away.

What to test before replacing parts

Smoke test for vacuum leaks, compare bank 1 and bank 2 fuel trims, and check MAF readings and fuel pressure before replacing the MAF, injectors or fuel pump.

  1. Have a smoke test done to find vacuum leaks
  2. Clean or test the mass air flow sensor
  3. Check fuel pressure, especially if P0171 is also set

Signs you may notice

  • Check engine light on
  • Rough or unsteady idle
  • Hesitation when accelerating
  • Possible misfires or stalling

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum leak from a cracked hose, PCV hose or intake gasket
  • CommonDirty or faulty mass air flow sensor
  • PossibleWeak fuel pump, clogged filter or faulty pressure regulator
  • PossibleClogged fuel injectors on bank 2
  • PossibleExhaust leak ahead of the bank 2 oxygen sensor

Typical repair once the cause is confirmed

Most often a vacuum leak repair or MAF sensor cleaning; low fuel pressure needs a pump or filter.

Repair costInsufficient verified pricing for this vehicle and repair
Repair vacuum leak (hose, PCV or intake gasket). Prepare an itemized shop request.

Where it shows up

  • Often appears together with P0171 when one leak or a dirty MAF affects both banks

Known on these vehicles

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0174 mean?

The engine on bank 2 is getting too much air or not enough fuel, and the computer can't add enough fuel to correct it. When it shows up with P0171, look for a problem that affects both sides.

Can I drive with code P0174?

If it runs smoothly you can usually drive gently for a short time, but get it checked soon; a lean engine can misfire and run hot. If the check engine light flashes, the engine shakes or misfires, hesitates badly, or stalls, slow down and get it checked right away.

What causes P0174?

Common possibilities to test include: vacuum leak from a cracked hose, pcv hose or intake gasket; dirty or faulty mass air flow sensor; weak fuel pump, clogged filter or faulty pressure regulator; clogged fuel injectors on bank 2. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.