Home › Code lookup › P0194
Powertrain code · Fuel and air

P0194 Fuel Rail Pressure Sensor "A" Circuit Intermittent

How urgent? Get it checked in the next few days

What it means

The fuel rail pressure sensor's signal keeps dropping out or jumping, usually from a loose connection or failing sensor.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Wiggle-test the connector and wiring while watching the live reading
  2. Inspect the connector pins for corrosion

Signs you may notice

  • Check engine light on
  • Occasional stumble, stall or loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLoose or corroded connector
  • CommonIntermittent wiring break
  • PossibleFailing fuel rail pressure sensor

Typical repair once the cause is confirmed

Repair the connection or wiring; replace the sensor if the signal still drops out.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel rail pressure sensor. Prepare an itemized shop request.
Walk through it step by step: Engine stalls while driving →

Common questions

What does P0194 mean?

The fuel rail pressure sensor's signal keeps dropping out or jumping, usually from a loose connection or failing sensor.

Can I drive with code P0194?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0194?

Common possibilities to test include: loose or corroded connector; intermittent wiring break; failing fuel rail pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.